Sungold Power 10KW 48V Split Phase Solar Inverter:

The Sungold Power 10KW 48V Split Phase Solar Inverter is an all-in-one, high-performance solution designed for reliable off-grid and hybrid solar power systems. Combining a 10,000-watt pure sine wave inverter, 200-amp battery charger, and dual MPPT solar charge controllers, this inverter delivers stable and clean power for residential and commercial applications. With split phase (120V/240V) and single phase (120V) outputs, it supports a wide range of appliances and systems. The included Wi-Fi module enables remote monitoring and control via a mobile app, making it a smart and efficient choice for modern solar setups.

Key Features of the Sungold Power 10KW Solar Inverter

All-in-One Powerhouse

• 10,000W Pure Sine Wave Inverter: Provides clean and stable power for sensitive electronics.

• 200A Battery Charger: Supports fast and efficient battery charging.

• Dual MPPT Charge Controllers: Maximizes solar energy harvesting with a 500VDC max PV input voltage.

• Split Phase and Single Phase Outputs: Supports 120V/240V split phase and 120V single phase configurations.

Scalable and Parallel Ready

• Parallel Functionality: Connect up to 6 units for a total output of 48KW.

• Multi-Phase Support: Enables 120V single phase, 120V/240V split phase, and 208V 3-phase configurations (requires 3+ units).

Smart Protection and Stability

• Overload and Surge Protection: Handles peak power up to 20,000W and motor loads up to 6HP.

• Comprehensive Safety Features: Includes PV input over-voltage/current protection, AC input over-voltage protection, and battery over-voltage protection.

Flexible Charging and Output Modes

• 4 Charging Modes: Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging.

• 4 Output Modes: Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority.

• Time-Slot Charging/Discharging: Optimizes energy usage based on peak and off-peak tariffs.

Wide Battery Compatibility

• Supports Multiple Battery Types: Works with 48V AGM, Sealed, Gel, Flooded, and Lithium batteries.

• User-Defined Mode: Customizable settings for unique battery requirements.

• Battery-Free Operation: Can operate without a battery, using grid or PV power directly.

Remote Monitoring and Control

• Wi-Fi Connectivity: Monitor and control the inverter remotely via a mobile app.

• Multiple Communication Interfaces: Includes RS485, CAN, USB, and dry contact ports.

Specifications

Inverter Output

• Rated Output Power: 10,000W
• Max Peak Power: 20,000W
• Output Voltage: 120V/240V (split phase) or 120V (single phase)
• Motor Load Capacity: 6HP
• Waveform: Pure Sine Wave
• Switch Time: 10ms

Battery

• Battery Voltage: 48V
• Voltage Range: 40€“60V
• Max Charging Current: 200A (MPPT), 120A (Mains/Generator)
• Battery Types Supported: Li-ion, Lead-Acid, User-Defined

PV Input

• MPP Trackers: 2
• Max PV Array Power: 11,000W
• Max Input Current: 22A per tracker
• MPPT Voltage Range: 125€“425V

Efficiency

• MPPT Tracking Efficiency: 99.9%
• Max Inverter Efficiency: 92%

General

• Dimensions: 17.9 x 26 x 5.1 inches
• Weight: 54 lbs
• Operating Temperature: -10°C to 55°C (14°F to 131°F)
• Protection Rating: IP20 (Indoor Use Only)
• Warranty: 2 Years

User Manual

Sungold Power 10KW 48V Split Phase Solar Inverter User Manual